Case Study

Case Studies

Read the latest information on AddUp, metal 3D printing, and more. Looking for press material? That’s over here.

Siebenwurst Injection Mold [Case Study]

A mold slide enables complex forming in the injection molding process by moving into the mold before injecting the hot plastic and moving out again after cooling to eject parts...


Rocket Nozzle [Case Study]

Metal additive manufacturing can lead to fuel and production savings in aerospace. In this case study you will see how AddUp optimized the design of a rocket nozzle to improve...


ADS Spherical Tank [Case Study]

ADS (Airbus Defence and Space) partners with AddUp to produce a spherical tank that can hold the operating pressure of 60 bar for two-phase fluid loop applications using fluids in...


Heat Exchanger [Case Study]

AddUp and PrintSky join forces to increase the Technology Readiness Level (TRL) of a new-generation heat exchanger. They produced a high-performance part with complex geometries in Aluminum using metal additive...


5-in-1 Manifold [Case Study]

A Greek manufacturer Spyros Panopoulos Automotive has asked AddUp to produce 3D-printed parts, including a 5-in-1 manifold. The challenge for AddUp was to create a design and 3D print of...


Injection Mold [Case Study]

Short injection times are crucial for profitability in the mold industry, especially in the case of injection molds. Zahoransky AG, a German manufacturer of injection molds, needed a mold insert...


Heat Exchanger Inconel® 718 [Case Study]

For thermal equipment, additive manufacturing has a huge advantage. It allows the development of complex channel shapes and thus improves thermal performance and reduces volume. It also allows manufacturing shapes...


Medical Implants [Case Study]

Additive Manufacturing (AM) allows for geometric complexity to create lattice structures for medical parts. Read more about AddUp’s case study on how additive manufacturing reduces production times and costs for...


Schneider Inductor [Case Study]

An induction heating coil is a production tool that allows performing a local heat treatment on metallic parts; in this case, it is used to braze contact tips on copper...


Cold Plate [Case Study]

In the race for electrification, among the issues is the cooling of electronic components. The challenge is twofold because the weight of the vehicle must also be as low as...